Název: Effect of grit blasting surface treatment on high temperature low cycle fatigue life of Inconel 713LC
Autoři: Šulák, Ivo ; Obrtlík, Karel ; Čelko, L. ; Gejdoš, P.
Typ dokumentu: Příspěvky z konference
Konference/Akce: Multi Scale Design of Advanced Materials, Velké Bílovice (CZ), 2015-05-28 / 2015-05-29
Rok: 2015
Jazyk: eng
Abstrakt: This paper presents the results of high temperature low cycle fatigue tests carried out on Inconel 713LC. This polycrystalline nickel based superalloys is mainly used for high temperature applications such as disks, blades and vanes of gas turbine engines. These machine components are manufactured by investment casting and undergo a series of postcast processes to remove remnants of shells, oxides and other contaminants. Grit blasting is one of the most widely used and cheapest technology ensuring adequate cleaning of the surface and at the same time is used to treat the substrate surface prior to application of metalic bond coat and various protective coatings (like diffusion, overlay or thermall barier coatings). Low cycle fatigue tests were conducted on as-received and grit blasted material in fully reversed pull-push cycle in strain control mode with constant total strain amplitude and strain rate at 900 °C in air. Experimental data on fatigue life were evaluated and parameters of Baquin and Coffin-Manson curves were obtained for both tested materials. Specimen surface and cross sections of both treated and untreated materials were analysed prior to fatigue tests and also after testing by means of optical microscopy (OM), as well as scaning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) and Vickers microhardness was measured. Fatigue degradation mechanisms was documented in both materials and negligible effect of grit blasting on low cycle parameters was discussed.
Klíčová slova: Grit blasting; High temperature fatigue life; Inocel 713LC; Surface microhardnes; Surface relief
Číslo projektu: EE2.3.20.0214, GA15-20991S (CEP)
Poskytovatel projektu: GA MŠk, GA ČR
Zdrojový dokument: Multi-level Design of Advanced Materials, ISBN 978-80-214-5146-9

Instituce: Ústav fyziky materiálů AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0249306

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-200422


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav fyziky materiálů
Konferenční materiály > Příspěvky z konference