Number of found documents: 1049
Published from to

Solution of the Compressible Viscous Fluid Flow past Minichannels
Hála, Jindřich; Hyhlík, T.; Luxa, Martin
2012 - Czech
This paper deals with compressible viscous fluid flow past minichannels of the rectangular cross-section. The numerical solution was formulated and the results of the numerical solution were analysed including the comparsion with the experimental results which were carried out in the aerodynamics laboratory of the IT AS CR, v.v.i. Přispěvek se zabývá prouděním vazké stlačitelné tekutiny při vysokých rychlostech v minikanálech obdélníkového průřezu. Pro numerickou simulaci je formulována úloha řešení parametrů proudu stlačitelné vazké tekutiny minikanálem. Výsledky výpočtu jsou dosaženy užitim programu Fluent a je proveden jejich podrobný rozbor včetně porovnáni s výsledky experimentů. Keywords: minichannel; friction factor; numerical simulation Available at various institutes of the ASCR
Solution of the Compressible Viscous Fluid Flow past Minichannels

This paper deals with compressible viscous fluid flow past minichannels of the rectangular cross-section. The numerical solution was formulated and the results of the numerical solution were analysed ...

Hála, Jindřich; Hyhlík, T.; Luxa, Martin
Ústav termomechaniky, 2012

Turbulence Study of Skoda Turbine Cascade VZLU Wind Tunel
Uruba, Václav; Jonáš, Pavel; Antoš, Pavel; Jelínek, T.; Michálek, J.
2012 - Czech
Time-averaged unsteady flow characteristics were investigated using CTA thermoanemometer with a rotary hot-wire in the VZLÚ test facility for testing ŠKODA turbine linear cascades. Direction and magnitude of the mean velocity vector and the components of Reynolds stress tensor and other statistical characteristics were evaluated for given configurations. V příspěvku jsou uvedeny vybrané charakteristiky turbulentního proudění ve vstupním kanále měřicího prostoru cirkulačního tunelu VZLÚ. Byly zjištěny základní charakteristiky turbulence na vstupu do měřicího prostoru, zejména intenzita turbulence, tenzor Reynoldsových napětí, energetická spektra atd., a to pro vybrané tunelové režimy. Pro měření byla použito otáčivé anemometrické sondy se žhaveným drátkem. Keywords: hot wire; TA anemometry; turbulence Available at various institutes of the ASCR
Turbulence Study of Skoda Turbine Cascade VZLU Wind Tunel

Time-averaged unsteady flow characteristics were investigated using CTA thermoanemometer with a rotary hot-wire in the VZLÚ test facility for testing ŠKODA turbine linear cascades. Direction and ...

Uruba, Václav; Jonáš, Pavel; Antoš, Pavel; Jelínek, T.; Michálek, J.
Ústav termomechaniky, 2012

Měření transsonického a supersonického proudění v modelech oběžného lopatkování posledního stupně parní turbíny velkého výkonu
Šafařík, P.; Luxa, Martin; Šimurda, David
2012 - Czech
The paper presents results of aerodynamic experiments, methods of measurement and analyses of pictures of flow fields with respect to design improvement and reliable operation of large output steam turbines. V článku jsou uvedeny výsledky aerodynamických experimentů, metody měření a rozbory proudových polí z hlediska potřeb pro zdokonalování konstrukce a pro spolehlivý provoz parních turbín velkého výkonu. Keywords: steam turbine; transonic flow; blade cascades; experiment Available at various institutes of the ASCR
Měření transsonického a supersonického proudění v modelech oběžného lopatkování posledního stupně parní turbíny velkého výkonu

The paper presents results of aerodynamic experiments, methods of measurement and analyses of pictures of flow fields with respect to design improvement and reliable operation of large output steam ...

Šafařík, P.; Luxa, Martin; Šimurda, David
Ústav termomechaniky, 2012

Measurement of temperature fluctuations generated by parallel heat sources in a turbulent flow
Antoš, Pavel
2012 - Czech
Paper deals with the temperature field generated by a system of parallel heated wires placed in the turbulent flow. A variance of temperature fluctuation was evaluated from the thermoanemometry measurement employing a dual probe. Decay of the temperature fluctuations follows power law. Příspěvek popisuje výsledky měření v proudu vzduchu za sítem (generátorem turbulence) a řadou žhavených vláken. Z měření dvoudrátkovou termoanemometrickou sondou byla v měřených bodech vyhodnocena variance teploty. Útlum teplotních fluktuací ve směru proudění lze popsat mocninným vztahem. Keywords: thermoanemometry; temperature fluctuation; mandoline Available at various institutes of the ASCR
Measurement of temperature fluctuations generated by parallel heat sources in a turbulent flow

Paper deals with the temperature field generated by a system of parallel heated wires placed in the turbulent flow. A variance of temperature fluctuation was evaluated from the thermoanemometry ...

Antoš, Pavel
Ústav termomechaniky, 2012

Experimental equipment for low-temperature hydrogen fuel cell research
Němec, Tomáš; Maršík, F.
2012 - Czech
Experimental equipment for low-temperature hydrogen fuel cell research is described. The devices allow to perform degradation testing of polymer membranes and catalytic layers, measure their physical properties, and evaluate their structural changes after degradation test. Nízkoteplotním vodíkovým palivovým článkům je v současné době věnována značná pozornost díky jejich možnému využití jako spolehlivého, úsporného a čistého zdroje energie pro využití např. v dopravě nebo v domácnostech. Většímu rozšíření této technologie ale dosud kromě vysokých výrobních nákladů brání nedostatečná životnost současných zařízení. Jedním z hlavních problémů je degradace polymerní membrány a katalytických vrstev palivového článku. Při zatížení palivového článku dochází ke snižování protonové vodivosti polymerní membrány a k jejímu chemickému a mechanickému poškození. V katalytických vrstvách nastává shlukování nanočástic katalyzátoru, částice se uvolňují a jsou transportovány do jiných oblastí palivového článku. Tyto jevy mají negativní vliv na výkon celého zařízení a vedou k jeho nevratnému poškození. Keywords: fuel cell; polymer electrolyte membrane; degradation Available at various institutes of the ASCR
Experimental equipment for low-temperature hydrogen fuel cell research

Experimental equipment for low-temperature hydrogen fuel cell research is described. The devices allow to perform degradation testing of polymer membranes and catalytic layers, measure their ...

Němec, Tomáš; Maršík, F.
Ústav termomechaniky, 2012

Visualization of the flow around rotating cylinder
Broučková, Z.; Trávníček, Zdeněk; Šafařík, P.
2012 - Czech
The visualization of the flow around a rotating and standing cylinder has been performed in air. This visualization has been performed for two velocities of a freestream for Reynolds numbers Re = 920 a 990 and for four frequencies of the rotation (0 s-1, 5 s-1, 12.5 s-1 and 20 s-1). The results have been compared with the theoretical model – potential flow. The velocity of the freestream has been evaluated by measurement of the frequency of the shedding vortices behind the standing cylinder in the regime of the Kármán vortex street. In the regime of the Kármán vortex street the Reynolds numbers were Re = 110 a 120. The known relations between Stouhal and Reynolds numbers were used. Byla provedena vizualizace obtékání stojícího i rotujícího válce ve vzduchu. Vizualizace byla provedena pro dvě rychlosti nabíhajícího proudu pro Reynoldsova čísla Re = 920 a 990 a pro čtvery otáčky válce (0 s -1, 5 s -1 , 12,5 s -1 a 20 s -1). Získané výsledky byly porovnány s teoretickým modelem - potenciálním prouděním. Rychlost nabíhajícího proudu byla vyhodnocena na základě měření frekvence odplouvajících vírů za stojícím válcem v režimu Kármánovy vírové řady při Re = 110 a 120 s využitím známých závislostí mezi Strouhalovým a Reynoldsovým číslem. Keywords: flow around cylinder; visualization; potential flow Available at various institutes of the ASCR
Visualization of the flow around rotating cylinder

The visualization of the flow around a rotating and standing cylinder has been performed in air. This visualization has been performed for two velocities of a freestream for Reynolds numbers Re = 920 ...

Broučková, Z.; Trávníček, Zdeněk; Šafařík, P.
Ústav termomechaniky, 2012

Influence of force transducer’s mounting on its signal
Půst, Ladislav; Pešek, Luděk
2012 - Czech
Some records of dry-friction-properties measurement at oscillating relative motion were distorted owing to higher harmonics. Numerical simulation of simplified model of experimental set shows that this distorsion is caused by the interaction of dynamic properties of force transducer’s support. In the case when some harmonics of excitation dry friction force coincides with the any eigenfrequency of support. Using support with sufficiently high eigenfrequencies replaces this kind of distorsion. Některé záznamy měření třecích charakteristik při vibračním relativním pohybu byly zkresleny vlivem vyšších harmonických složek. Numerické řešení jednoduchého modelu experimentálního zařízení ukázalo, že toto zkreslení je způsobeno dynamickými vlastnostmi opěrky snímače síly. Když nějaká harmonická buzení třecí silou souhlasí s vlastní frekvencí opěrky, rušivý signál se zesiluje. Zvýšením tuhosti podpěry se toto zkreslení odstraní. Keywords: distorsion of signal; force transducer’s support; higher harmonics Available at various institutes of the ASCR
Influence of force transducer’s mounting on its signal

Some records of dry-friction-properties measurement at oscillating relative motion were distorted owing to higher harmonics. Numerical simulation of simplified model of experimental set shows that ...

Půst, Ladislav; Pešek, Luděk
Ústav termomechaniky, 2012

Contribution to Active control of resonant vibration of blades by synchronous electromagnets
Pešek, Luděk; Bula, Vítězslav; Vaněk, František; Cibulka, Jan
2012 - Czech
The system for active control of the test blade wheel under rotation was designed and realized in the IT AS CR. It consists of the eight electromagnets distributed around the circumference of the wheel. The control program for electromagnet synchronization was developed in the dSPACE environment. In the contribution the active control system is introduced and first results of dynamic experiments with an open loop control are presented. Obsahem příspěvku je návrh a realizace aktivního řízení vibrací lopatkového kola za rotace vypracované v ÚT AV ČR. Budící část je složena z osmi po obvodě kola rozmístěných elektromagnetů. Řídící program byl vyvinut v programu dSPACE. V příspěvku je prezentován algoritmus řídícího programu a první výsledky dynamického experimentu na svazku lopatek s řízením v otevřené smyčce. Keywords: active control; vibration; bladed wheel; electromagnet Available at various institutes of the ASCR
Contribution to Active control of resonant vibration of blades by synchronous electromagnets

The system for active control of the test blade wheel under rotation was designed and realized in the IT AS CR. It consists of the eight electromagnets distributed around the circumference of the ...

Pešek, Luděk; Bula, Vítězslav; Vaněk, František; Cibulka, Jan
Ústav termomechaniky, 2012

Contribution to application of parametric "anti-resonance" for autoparametric systems.
Pešek, Luděk; Tondl, A.
2012 - Czech
It is shown that the parametric anti-resonance (additional parametric excitation fulfilling speciál conditions) can be used not only for suppressing self-excited or externally excited vibrations but can be used also for stabilisation of equilibrium position of an autoparametric system. V příspěvku je ukázáno, že parametrická antirezonance, tj. přídavné parametrické buzení splňující speciální podmínky, může být použita nejen pro potlačení samobuzených nebo vnější silou buzených kmitů, ale i pro stabilizaci rovnovážné polohy autoparametrických systémů. Keywords: autoparametric systems; parametric anti-resonance; stabilization of equilibrium Available at various institutes of the ASCR
Contribution to application of parametric "anti-resonance" for autoparametric systems.

It is shown that the parametric anti-resonance (additional parametric excitation fulfilling speciál conditions) can be used not only for suppressing self-excited or externally excited vibrations ...

Pešek, Luděk; Tondl, A.
Ústav termomechaniky, 2012

Measurement of transonic and supersonic flow in models of rotor blades of last stage large output steam turbine
Šafařík, P.; Luxa, Martin; Šimurda, David
2012 - Czech
The paper deals with experimental research on transonic and supersonic flow in models of turbine cascades which represent the rotor blades of last stage large output steam turbine. Příspěvek se zabývá experimentálním výzkumem transsonického a supersonického proudění v modelech turbínových mříží, které reprezentují oběžné lopatkování posledního stupně parní turbíny velkého výkonu. Keywords: rotor blade; transonic flow; supersonic flow Available at various institutes of the ASCR
Measurement of transonic and supersonic flow in models of rotor blades of last stage large output steam turbine

The paper deals with experimental research on transonic and supersonic flow in models of turbine cascades which represent the rotor blades of last stage large output steam turbine.

Šafařík, P.; Luxa, Martin; Šimurda, David
Ústav termomechaniky, 2012

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases