Measurement on Valve II - Appendix
Šimurda, David; Hála, Jindřich; Luxa, Martin
2017 - English Report contains results and evaluation of pneumatic measurements conducted on the overloading valve system. Keywords: intermediate pressure cylinder; steam admission; steam valve; valve characteristics Available at various institutes of the ASCR Measurement on Valve II - Appendix

Report contains results and evaluation of pneumatic measurements conducted on the overloading valve system.

Šimurda, David; Hála, Jindřich; Luxa, Martin
Ústav termomechaniky, 2017

Aspheric lenses test report
Lédl, Vít; Melich, Radek; Procháska, František; Steiger, Lukáš; Chiarini, M.; Cibin, L.
2017 - English The scope of the document is to report the results of the tests on each of the 16 Aspheric Lenses + the 4 spare Aspheric Lens. \nIn particular, the tests performed on each lens are: reflectance of the coating on both the Aspheric Lens faces, interferometric profile of the Aspherical face and of the Spherical face of the Aspherical Lens. Keywords: aspherical lens; coating; interferometry Available at various institutes of the ASCR Aspheric lenses test report

The scope of the document is to report the results of the tests on each of the 16 Aspheric Lenses + the 4 spare Aspheric Lens. \nIn particular, the tests performed on each lens are: reflectance of the ...

Lédl, Vít; Melich, Radek; Procháska, František; Steiger, Lukáš; Chiarini, M.; Cibin, L.
Ústav fyziky plazmatu, 2017

Influence of inner geometry shapes of suspension nozzles on hydraulic power conditions and water velocity fields of jets
Zeleňák, Michal; Říha, Zdeněk
2017 - English The aim of study was numerical simulation of water flow with absence of abrasive particles inside inner geometry of suspension nozzle. Shapes of cone - radius profiles in relation with change of hydraulic parameters were studied. Results of simulations are presented in report. Keywords: high-speed abrasive suspension jet; cutting; technology; flow modelling Available at various institutes of the ASCR Influence of inner geometry shapes of suspension nozzles on hydraulic power conditions and water velocity fields of jets

The aim of study was numerical simulation of water flow with absence of abrasive particles inside inner geometry of suspension nozzle. Shapes of cone - radius profiles in relation with change of ...

Zeleňák, Michal; Říha, Zdeněk
Ústav geoniky, 2017

Research report 2013-11-08 Calcite_S12
Kumpová, Ivana; Vopálenský, Michal; Vavřík, Daniel
2017 - English Porosity was measured on a irregular sample of calcite, designated Calcite_S12, using the TORATOM device in the Centre of Excellence Telč. Keywords: calcite; TORATOM; measuring Available at various institutes of the ASCR Research report 2013-11-08 Calcite_S12

Porosity was measured on a irregular sample of calcite, designated Calcite_S12, using the TORATOM device in the Centre of Excellence Telč.

Kumpová, Ivana; Vopálenský, Michal; Vavřík, Daniel
Ústav teoretické a aplikované mechaniky, 2017

CFD simulation of a free surface jet of high pressure nozzle. Jet sloping 90° 85° and 75°
Říha, Zdeněk
2017 - English The report contains CFD results and description of the two phase flow water and air. Water comes into the computational domain through the nozzle which creates water jet. The jet falls on the wall surface where flows along the surface plate in all directions (x,y mainly). The aim of the work is to show how the falling water flows on the wall surface with help of advanced CFD model. Three cases had been solved there with a various jets sloping to the bottom surface plate. The first case contains results with configuration of the geometry for the jet sloping 90o. Second case contains results with configuration of the geometry for the jet sloping 85o and third case contains results with configuration of the geometry for the jet sloping 75o, see enclosures 1, 2 and 3. Given calculation had been done as steady state calculations. Keywords: CDF model; free surface jet; high pressure nozzle Available at various institutes of the ASCR CFD simulation of a free surface jet of high pressure nozzle. Jet sloping 90° 85° and 75°

The report contains CFD results and description of the two phase flow water and air. Water comes into the computational domain through the nozzle which creates water jet. The jet falls on the wall ...

Říha, Zdeněk
Ústav geoniky, 2017

AAS - test readiness review
Budasz, Jiří; Lédl, Vít; Pleštil, Jan; Steiger, Lukáš; Václavík, Jan; Veselý, Martin
2017 - English This document describes the test procedure applicable to the electrical and functional tests of the Alignment Aid System.\nThe test to be performed according to this procedure are to demonstrate the compliance of the above item to the requirements specified in the applicable document as part of the overall verification program. The test results shall be collected in a Test Report. Keywords: laser; mirror; reference; measurement Available on request at various institutes of the ASCR AAS - test readiness review

This document describes the test procedure applicable to the electrical and functional tests of the Alignment Aid System.\nThe test to be performed according to this procedure are to demonstrate the ...

Budasz, Jiří; Lédl, Vít; Pleštil, Jan; Steiger, Lukáš; Václavík, Jan; Veselý, Martin
Ústav fyziky plazmatu, 2017

Application and Misapplication of the Czechoslovak STP Cipher During WWII - Report on an Unpublished Manuscript
Porubský, Štefan
2017 - English Keywords: STP cipher; Josef Růžek; Karol Cigáň; František Moravec; Czechoslovak military cryptography; Word War II Available on request at various institutes of the ASCR Application and Misapplication of the Czechoslovak STP Cipher During WWII - Report on an Unpublished Manuscript

Porubský, Štefan
Ústav informatiky, 2017

Alternative Formulation of Pay-as-clear Auction in Electricity Markets
Aussel, D.; Červinka, Michal; Henrion, R.; Pištěk, Miroslav
2017 - English In widely used formulation of pay-as-clear electricity market the clearing price is given by the Lagrange multiplier of the demand sat- isfaction constraint in the problem of the Independent System Operator (ISO). Following this idea, one may usually calculate the market clearing\nprice analytically even for problems of higher dimensions. However, the economic interpretation of such a market setting is in question, since the minimized criterion does not correspond neither to the cost of production nor to the overall payment of consumers. This observation motivated us\nto propose an alternative clearing mechanism where the total payment of consumers is explicitly minimized. We show existence and uniqueness of the clearing price in such a setting. Keywords: electricity market; Lagrange multiplier; Independent System Operator Available at various institutes of the ASCR Alternative Formulation of Pay-as-clear Auction in Electricity Markets

In widely used formulation of pay-as-clear electricity market the clearing price is given by the Lagrange multiplier of the demand sat- isfaction constraint in the problem of the Independent System ...

Aussel, D.; Červinka, Michal; Henrion, R.; Pištěk, Miroslav
Ústav teorie informace a automatizace, 2017

Chemical and microstructural characterization of the render, sampled from the Garden wall of the US Embassy in Prague 1
Slížková, Zuzana; Frankeová, Dita; Viani, Alberto; Hauková, Petra; Koudelková, Veronika; Svoboda, Milan
2017 - English The aim of the work was to analyze the mortar taken from the Garden wall (US Embassy, Prague 1). Analyzes were performed for the binder and filler characterization and the sample was also dissolved in HCl to determine the mixing ratio. Keywords: survey; material characterization; chemical composition; binder and aggregate characterization Available at various institutes of the ASCR Chemical and microstructural characterization of the render, sampled from the Garden wall of the US Embassy in Prague 1

The aim of the work was to analyze the mortar taken from the Garden wall (US Embassy, Prague 1). Analyzes were performed for the binder and filler characterization and the sample was also dissolved in ...

Slížková, Zuzana; Frankeová, Dita; Viani, Alberto; Hauková, Petra; Koudelková, Veronika; Svoboda, Milan
Ústav teoretické a aplikované mechaniky, 2017

Neostel collimator realization detailed optical design
Lédl, Vít; Pleštil, Jan; Psota, Pavel; Steiger, Lukáš; Václavík, Jan; Tomáš, V.
2017 - English The aim of this document is to describe the optical design of the Alignment Collimator for the NEOSTEL telescope. The document describes proposed optical and mechanical design. It consists of several parts: Optical design and its tolerance analysis, Ghost image analysis, Stray light analysis, Mechanical design and FEM analysis. Keywords: collimator; FEM; alignment; telescope; optical design Available at various institutes of the ASCR Neostel collimator realization detailed optical design

The aim of this document is to describe the optical design of the Alignment Collimator for the NEOSTEL telescope. The document describes proposed optical and mechanical design. It consists of several ...

Lédl, Vít; Pleštil, Jan; Psota, Pavel; Steiger, Lukáš; Václavík, Jan; Tomáš, V.
Ústav fyziky plazmatu, 2017