Number of found documents: 450
Published from to

Algorithmic Selection of Feasible Preferences
Siváková, Tereza; Kárný, Miroslav
2019 - Czech
This bachelor’s thesis studies the optimal decision making for a discrete Markov decision process with a focus on preferences. By using a fully probabilistic design that introduces the so-called ideal behavior distribution, which has high probability values of preferred behaviors and small probability values of inappropriate behaviors, an optimal decision policy has been found. The thesis constructs an algorithm for selecting the optimal ideal behavior distribution and provides a more general solution than published ones. The thesis also opens a possibility to specify further preferences on selected actions. Properties of the resulting decision making are illustrated on simulated examples. Tato bakalářská práce se zabývá teorií optimálního rozhodování pro diskrétní markovský rozhodovací proces z hlediska volby preferencí. Za pomoci plně pravděpodobnostního návrhu, který zavádí tzv. ideální distribuci chování, která přiřazuje vysoké hodnoty pravděpodobnosti preferovanému chování a malé hodnoty pravděpodobnosti nežádoucímu chování, se hledá optimální rozhodovací politika. Tato práce obsahuje návod k nalezení optimální ideální distribuce chování a přináší obecnější řešení než řešení dosud známá. Dále přidává možnost respektování další preference, a to na volbu akcí. Vlastnosti výsledného rozhodování jsou ilustrovány simulačními experimenty. Keywords: decision-making; probabilistic policies; quantification of aims Fulltext is available at external website.
Algorithmic Selection of Feasible Preferences

This bachelor’s thesis studies the optimal decision making for a discrete Markov decision process with a focus on preferences. By using a fully probabilistic design that introduces the so-called ideal ...

Siváková, Tereza; Kárný, Miroslav
Ústav teorie informace a automatizace, 2019

E-proceedings of multidisciplinary conference papers LASER59
Růžička, Bohdan
2019 - Czech
Conference LASER59 is a multidisciplinary and intersectoral event where different kind of specialist can meet each other. They come from various environments (private company, university, public research organization etc.). Their common denominators are laser, optics and its applications.\n Konference LASER59 je mezioborová a intersektorová akce, na které se mohou potkat profesionálové z různých oborů. Společným jmenovatelem jsou lasery, optika a jejich aplikace. Účastníci pocházejí z různých prostředí (soukromé společnosti, vysoké školy, veřejné výzkumné organizace atd.). Keywords: laser; laser technology; optics; optical fiber Fulltext is available at external website.
E-proceedings of multidisciplinary conference papers LASER59

Conference LASER59 is a multidisciplinary and intersectoral event where different kind of specialist can meet each other. They come from various environments (private company, university, public ...

Růžička, Bohdan
Ústav přístrojové techniky, 2019

Influence of coating technology and thermal annealing on the optical performance of AR coatings in iodine-filled absorption cells.
Oulehla, Jindřich; Pokorný, Pavel; Hrabina, Jan; Holá, Miroslava; Číp, Ondřej; Lazar, Josef
2019 - Czech
We stude the influence of thermal annealing on the optical performance of thin film coatings used in laser spectroscopy with iodine-filled absorption cells. We are particulary interested in the temperature influence on the position of the residual reflection minimum in the spectrum and on the permeation of the working gas into the coating structure depending on the coating technology used.\n Studujeme vlic teploty na spektrální vlastnosti optických tenkých vrstev, které jsou využívány v laserové spektroskopii s absorpčními kyvetami. Jedná se zejména o vliv teploty na polohu minima zbytkové odrazivosti ve spektru a na pronikání pracovního plynu do struktury tenké vrstvy v závislosti na použité depoziční technologii.\n Keywords: absolute frequency-measurement standard; thin film optics, coatings; evaporation; PIAD Fulltext is available at external website.
Influence of coating technology and thermal annealing on the optical performance of AR coatings in iodine-filled absorption cells.

We stude the influence of thermal annealing on the optical performance of thin film coatings used in laser spectroscopy with iodine-filled absorption cells. We are particulary interested in the ...

Oulehla, Jindřich; Pokorný, Pavel; Hrabina, Jan; Holá, Miroslava; Číp, Ondřej; Lazar, Josef
Ústav přístrojové techniky, 2019

Rozhodování za neurčitosti: Pohled matematika na plánované hospodářství
Rohn, Jiří
2019 - Czech
V práci jsou popsány hlavní výsledky neoficiálního ekonomicko-matematického výzkumu provedeného v letech 1973-1980 pracovníky Ekonomicko-matematické laboratoře Ekonomického ústavu ČSAV a MFF (J. Bouška, J. Rohn a B. Kalendovský). Keywords: Leontěvův model; intervalová data; zaručené řešení; neexistence; matice 28 x 28 Available in digital repository of the ASCR
Rozhodování za neurčitosti: Pohled matematika na plánované hospodářství

V práci jsou popsány hlavní výsledky neoficiálního ekonomicko-matematického výzkumu provedeného v letech 1973-1980 pracovníky Ekonomicko-matematické laboratoře Ekonomického ústavu ČSAV a MFF (J. ...

Rohn, Jiří
Ústav informatiky, 2019

Reconstruction of the Renaissance sand-coloured sgraffito based on the material copy
Válek, Jan; Skružná, Olga; Kozlovcev, Petr; Waisserová, J.; Wichterlová, Z.; Jiroušek, Josef
2019 - Czech
The aim of the method is to provide a methodical design for the preparation of sand made sgraffito mortar and show its use on a specific example. Cílem památkového postupu je poskytnout metodický návrh přípravy maltového doplňku pískového\nsgrafita a ukázat jeho využití na konkrétním příkladu. Keywords: renaissance sgraffito; repairs of plasters; traditional building technologies; traditional lime techniques Available in a digital repository NRGL
Reconstruction of the Renaissance sand-coloured sgraffito based on the material copy

The aim of the method is to provide a methodical design for the preparation of sand made sgraffito mortar and show its use on a specific example.

Válek, Jan; Skružná, Olga; Kozlovcev, Petr; Waisserová, J.; Wichterlová, Z.; Jiroušek, Josef
Ústav teoretické a aplikované mechaniky, 2019

Research report. Experimental study of effects of various consolidants on mechanical characteristics of historic lime render
Slížková, Zuzana
2019 - Czech
The chemical-physical properties of the historical lime render to be restored were tested and then the tests of consolidation effects using liquid consolidants based on ethyl silicate and nano-calcium dispersion were performed. The highest strengthening effect was achieved by double treatment of the render with product Remmers KSE 300 (based on ethyl silicate). Due to the required hydrophilic properties of the render after consolidation, the final treatment of the render with a nanolime suspension, eg CaLosil IP 15 or CaLoSiL E 25, was recommended. Byly zjištěny chemicko-fyzikální vlastnosti historické vápenné omítky vyžadující zpevnění a provedeny zkoušky zpevnění ethylsilikátem a nanovápennou disperzí. Nejvyššího zpevnění bylo dosaženo dvojnásobným ošetřením omítky prostředkem na bázi ethylsilikátu s koncentrací SiO2 300 g/l. Z důvodu požadovaných hydrofilních vlastností omítky bylo doporučeno finální ošetření omítky nanovápenným prostředkem, např. CaLosil IP 15 nebo CaLoSiL E 25. Keywords: historic lime mortar; consolidation; historic render; strengthening, ethylsilicate; nanolime suspension Available in a digital repository NRGL
Research report. Experimental study of effects of various consolidants on mechanical characteristics of historic lime render

The chemical-physical properties of the historical lime render to be restored were tested and then the tests of consolidation effects using liquid consolidants based on ethyl silicate and nano-calcium ...

Slížková, Zuzana
Ústav teoretické a aplikované mechaniky, 2019

ESP32-CAM – LET’S BUILD A LITTLE EYE
Zajíček, Milan
2019 - Czech
Microcontroller ESP32 can be obtained as a development board with 2Mpixel camera OV2640 together. The trademark of such module is ESP32-cam. Tutorial shows the abbility of the module to take the static pictures and video stream, communications skills and saving the data to the SD card. The USB-serial convertor CP2102 is used as an interface for the communication with PC. Mikrokontroler ESP32 je možné zakoupit jako vývojovou desku ve spojení s 2Mpixel kamerou OV2640. Tento modul je souhrnně označován ESP32-cam. Tutoriál ukazuje možnost použití uvedeného modulu pro snímání obrazu ve formě statických snímků i videa a možnosti komunikace s okolím, či ukládání dat na SD kartu. Pro komunikaci s PC je použit USB-Serial převodník CP2102. Keywords: IoT; ESP32; mikrokontroler; video Fulltext is available at external website.
ESP32-CAM – LET’S BUILD A LITTLE EYE

Microcontroller ESP32 can be obtained as a development board with 2Mpixel camera OV2640 together. The trademark of such module is ESP32-cam. Tutorial shows the abbility of the module to take the ...

Zajíček, Milan
Ústav teorie informace a automatizace, 2019

Possibilities of using 4D computed tomography in fracture tests
Kumpová, Ivana; Fíla, Tomáš; Koudelka, Petr; Rozsypalová, I.; Keršner, Z.; Kytýř, Daniel; Vopálenský, Michal; Vavřík, Daniel; Vyhlídal, M.; Drdácký, Miloš
2019 - Czech
The paper presents the study of the internal structure and fracture properties of selected quasi-brittle building materials subjected to temperature changes and the possibility of applying the method combining bending fracture tests and time-dependent computed tomography (4D CT). The tested specimens were subjected to hightemperature effects and subsequently tested by a four-point bending during 4D CT. Thus, 3D image information was obtained in different phases of loading and material damage. Comparative compression strength measurements were also performed. These results are in good agreement Příspěvek prezentuje studium vnitřní struktury a lomových vlastností vybraných kvazikřehkých stavebních materiálů vystavených teplotním změnám a možnosti uplatnění metody kombinující ohybové lomové testy a časově závislou výpočetní tomografii (4D CT). Zkušební tělesa byla podrobena účinkům vysokých teplot a následně testována čtyřbodovým ohybem během 4D CT. Byly tak získány 3D obrazové informace v různých fázích zatížení a porušování materiálu. Rovněž bylo provedeno komparativní měření pevnosti v tlaku. Tyto výsledky jsou v dobré shodě. Keywords: fracture process zone; spatial crack distribution; quasi-brittle material; X-Ray computed tomography; four-point bending test Fulltext is available at external website.
Possibilities of using 4D computed tomography in fracture tests

The paper presents the study of the internal structure and fracture properties of selected quasi-brittle building materials subjected to temperature changes and the possibility of applying the method ...

Kumpová, Ivana; Fíla, Tomáš; Koudelka, Petr; Rozsypalová, I.; Keršner, Z.; Kytýř, Daniel; Vopálenský, Michal; Vavřík, Daniel; Vyhlídal, M.; Drdácký, Miloš
Ústav teoretické a aplikované mechaniky, 2019

Jak jsme (z)řídili ústav aneb Od Centrálního výpočetního střediska ČSAV k Ústavu informatiky AV ČR
Šebesta, Václav
2019 - Czech
Jak jsme (z)řídili ústav aneb Od Centrálního výpočetního střediska ČSAV k Ústavu informatiky AV ČR Available in a digital repository NRGL
Jak jsme (z)řídili ústav aneb Od Centrálního výpočetního střediska ČSAV k Ústavu informatiky AV ČR

Jak jsme (z)řídili ústav aneb Od Centrálního výpočetního střediska ČSAV k Ústavu informatiky AV ČR

Šebesta, Václav
Ústav informatiky, 2019

Temperature gradients during laser welding
Šebestová, Hana; Horník, Petr; Mrňa, Libor
2019 - Czech
This contribution concludes results of thermocouples-based measurement of thermal cycles during IPG YLS 2000 fiber laser welding of S460MC steel with thickness 3 mm. Measured thermal gradients are compared with results of temperature field distribution simulation performed in FEM software SYSWELD. Předmětem tohoto příspěvku je měření teplotních cyklů při svařování oceli S460MC o tloušťce 3 mm vláknovým laserem IPG YLS 2000 pomocí termočlánků. Zjištěné teplotní gradienty jsou porovnány s výsledky MKP simulace teplotních polí při svařování laserem, provedené v programu SYSWELD. Keywords: laser welding; temperature gradient; thermocouple; simulation Fulltext is available at external website.
Temperature gradients during laser welding

This contribution concludes results of thermocouples-based measurement of thermal cycles during IPG YLS 2000 fiber laser welding of S460MC steel with thickness 3 mm. Measured thermal gradients are ...

Šebestová, Hana; Horník, Petr; Mrňa, Libor
Ústav přístrojové techniky, 2019

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases