Number of found documents: 48
Published from to

Applying a two degree of freedom model for drive-by identification
Bayer, Jan
2024 - English
A new concept of drive-by identification is examined applying the analogy with a Two Degree Of Freedom (DOF) system where the bridge is considered the ground-supported spring-mass and the moving spring-mass the second DOF. The response of the moving spring-mass is simulated on a bridge model using different road profiles and compared to parameters of the corresponding two DOF system. The focus is the spectral shift that can be observed on the moving spring-mass during its passage along the bridge and could possibly be applied for drive-by identification. The accuracy mainly depends on the relation of the moving spring-mass to the bridge mass and the relation between the natural frequency of the spring-mass and those of the bridge. The simulations showed that road profile can significantly reduce the accuracy of identified results, which imposes limits on practical applications. Keywords: drive-by identification; structural health monitoring; finite element analysis; road roughness; two DOF system Available in digital repository of the ASCR
Applying a two degree of freedom model for drive-by identification

A new concept of drive-by identification is examined applying the analogy with a Two Degree Of Freedom (DOF) system where the bridge is considered the ground-supported spring-mass and the moving ...

Bayer, Jan
Ústav teoretické a aplikované mechaniky, 2024

Solution methods for an aeroelastic problem with combined harmonic and stochastic excitation
Fischer, Cyril; Náprstek, Jiří
2024 - English
Assessing responses in slender engineering structures facing both deterministic harmonic and stochastic excitation is often based on an approximation by the single-degree-of-freedom van der Pol-type nonlinear model. Determining the response probability density function involves solving the Fokker-Planck equation, which is generally a challenging task. Hence, semi-analytical and numerical methods come into play. This contribution reviews several possible techniques and spotlights the exponential-polynomial-closure method. The shown results are limited, as the paper reflects an early stage of the relevant research direction. Keywords: Fokker-Planck equation; stochastic averaging; numerical solution; Galerkin approximation; van der Pol-type oscillator; partial amplitudes; exponential-polynomial-closure method Available in digital repository of the ASCR
Solution methods for an aeroelastic problem with combined harmonic and stochastic excitation

Assessing responses in slender engineering structures facing both deterministic harmonic and stochastic excitation is often based on an approximation by the single-degree-of-freedom van der Pol-type ...

Fischer, Cyril; Náprstek, Jiří
Ústav teoretické a aplikované mechaniky, 2024

Galloping of insulated bundled overhead line simplified analysis
Hračov, Stanislav; Macháček, Michael
2024 - English
Our paper provides an analysis of the susceptibility of a particular bundled overhead line to galloping. It presents a case study of an aerial bundled cable, consisting of four conductors insulated by polyethylene, and used for low-voltage power lines. The susceptibility to loss of stability is analyzed for cable without and with simulated icing observed on similar real conductors. In the first case, the proneness to galloping was excluded based on the results of CFD simulation and the Den Hartog criterion. In latter case, the possible occurrence of galloping was confirmed. The critical wind velocity for the ice-covered cable was calculated utilizing quasi-steady theory. Finally, the amplitudes of limit cycle oscillation for supercritical wind speeds were estimated based on simplified numerical analysis. Keywords: aerial bundled cable; wind effects; galloping; limit cycle oscillation Available in digital repository of the ASCR
Galloping of insulated bundled overhead line simplified analysis

Our paper provides an analysis of the susceptibility of a particular bundled overhead line to galloping. It presents a case study of an aerial bundled cable, consisting of four conductors insulated by ...

Hračov, Stanislav; Macháček, Michael
Ústav teoretické a aplikované mechaniky, 2024

LES simulations of airflow around rectangle with side ratio 2:1 and their comparison with experiments
Ledvinková, Blanka; Hračov, Stanislav; Macháček, Michael
2024 - English
Our contribution is focused on the comparison of the experimental investigations and of the numerical 3D LES simulations of the airflow around sharply edged rectangle with side ratio 2:1. The rectangle object was exposed to the airflow having a given velocity at different angles of the wind attack in the wind tunnel with the aim to obtain the curves of the aerodynamic coefficients and Strouhal number depending on the impact angle. The comparative numerical 3D simulations of the wind tunnel testing were performed using COMSOL Multiphysics and OpenFoam both incorporating the Large Eddy Simulation (LES) method. Keywords: rectangle 2:1; wind tunnel; LES simulation; aerodynamic characteristics Available in digital repository of the ASCR
LES simulations of airflow around rectangle with side ratio 2:1 and their comparison with experiments

Our contribution is focused on the comparison of the experimental investigations and of the numerical 3D LES simulations of the airflow around sharply edged rectangle with side ratio 2:1. The ...

Ledvinková, Blanka; Hračov, Stanislav; Macháček, Michael
Ústav teoretické a aplikované mechaniky, 2024

Galloping of insulated bundled overhead line - nonlinear numerical analysis in time domain
Macháček, Michael; Hračov, Stanislav
2024 - English
Our contribution focuses on a 3D numerical nonlinear analysis of galloping in a specific bundled overhead line with ice accretion. We studied the susceptibility to this self-excited oscillation, critical onset wind speeds, and global dynamic response of a very low-tensioned line with simulated icing observed on similar real conductors. Due to the highly nonlinear mechanical behavior of such a flexible cable, we employed the Newmark integration method combined with the iterative Newton-Raphson method. We analyzed two numerical models of the overhead line loaded by the wind: one assuming nonlinearity only in the wind load, while retaining the linearity of the mechanical system itself, and the other representing a fully nonlinear system including geometrical nonlinearity. Our analysis revealed that the determined critical wind speeds for the onset of galloping are in relatively close ranges for both models. However, numerical simulations with the fully nonlinear system indicated significantly lower amplitudes of limit cycle oscillations, especially at higher wind speeds, compared to the linear model of the line. This underscores the necessity of using fully nonlinear models during the design stage of such low-tensioned aerial conductors. Keywords: aerial bundled conductors; wind effects; galloping; limit cycle oscillation Available in digital repository of the ASCR
Galloping of insulated bundled overhead line - nonlinear numerical analysis in time domain

Our contribution focuses on a 3D numerical nonlinear analysis of galloping in a specific bundled overhead line with ice accretion. We studied the susceptibility to this self-excited oscillation, ...

Macháček, Michael; Hračov, Stanislav
Ústav teoretické a aplikované mechaniky, 2024

Stochastic version of the arc-length method
Náprstek, Jiří; Fischer, Cyril
2024 - English
The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution involved the derivation of the so-called ’Arc-Length’ method. Its essence lies in not incrementing the system parameter or any of the independent variables but rather the length of the response curve. The stochastic variant of this method allows for working with a system where system parameters include random imperfections. This contribution presents a variant that tracks the first two stochastic moments. Even in this simple case, interesting phenomena can be observed, such as the disappearance of the energy barrier against equilibrium jump due to random imperfections in the system. Keywords: random imperfection; stochastic arc-length method; continuation; numerical method Available in digital repository of the ASCR
Stochastic version of the arc-length method

The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution ...

Náprstek, Jiří; Fischer, Cyril
Ústav teoretické a aplikované mechaniky, 2024

Acoustic emission methods in steel bridge degradation identification and monitoring
Šorm, Filip
2024 - English
Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The goal is to find the most effective use of this method. Keywords: steel bridges; diagnostics; acoustic emission Available in digital repository of the ASCR
Acoustic emission methods in steel bridge degradation identification and monitoring

Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The ...

Šorm, Filip
Ústav teoretické a aplikované mechaniky, 2024

Innovative device for the simulation of environmental conditions and testing of building materials
Cacciotti, Riccardo; Wolf, Benjamin; Macháček, Michael; Frankl, Jiří
2022 - English
Excessive humidity influences the performance of building envelopes and the safety of their occupants. Moisture related problems can indeed impose significant health risks for buildings’ users and even lead, under extreme scenarios, to structural failures. This paper investigates an innovative experimental setup for evaluating the influence of changing environmental conditions on the performance of building materials. It stems out from a broader ongoing research aimed at studying the trends of mould growth on wooden building components. The presented results include the design, construction and numerical validation of a small-scale climatic wind tunnel (2m x 1.8m ca.) to be used for the simulation of natural ventilation and daily humidity and temperature fluctuations. Key findings include the final design of a low cost, modular construction which allows gathering reliable data on the response of building materials exposed to changing boundary conditions, intended for improving current mould growth models. Future work is also suggested. Keywords: building envelope; moisture; building material; wind tunnel; performance Available in digital repository of the ASCR
Innovative device for the simulation of environmental conditions and testing of building materials

Excessive humidity influences the performance of building envelopes and the safety of their occupants. Moisture related problems can indeed impose significant health risks for buildings’ users and ...

Cacciotti, Riccardo; Wolf, Benjamin; Macháček, Michael; Frankl, Jiří
Ústav teoretické a aplikované mechaniky, 2022

Application of first integrals in the construction of the Lyapunov function for the random response stability testing
Náprstek, Jiří; Fischer, Cyril
2022 - English
The paper deals with a possibility of using the properties of first integrals for the construction of Lyapunov function for the analysis of a dynamic system stability in the stochastic domain. It points out certain characteristics of first integrals resulting in the necessity to introduce additional constraints to assure the principal properties of the Lyapunov function. A number of these constraints has their physical interpretation with reference to system stability. The advantage of this method constructing the Lyapunov function consists in the fact that the Lyapunov function itself contains information on the examined system and, consequently, it is not merely a positive definite function without any relation to the actual case concerned. The presented theory finds application in many dynamical systems. The procedure is illustrated by a nonlinear SDOF example. Keywords: stochastic stability; Lyapunov function; first integrals; cyclic coordinates Available in digital repository of the ASCR
Application of first integrals in the construction of the Lyapunov function for the random response stability testing

The paper deals with a possibility of using the properties of first integrals for the construction of Lyapunov function for the analysis of a dynamic system stability in the stochastic domain. It ...

Náprstek, Jiří; Fischer, Cyril
Ústav teoretické a aplikované mechaniky, 2022

Determination of aerodynamic coefficients for air flow around U-profiles with different flange porosities
Ledvinková, Blanka; Hračov, Stanislav; Macháček, Michael
2022 - English
Our contribution presents the comparison of the experimental investigations and of the numerical 2D simulations of the air flow around U –profiles having different flange porosities. The U-shaped beams were exposed to the air flow having a given velocity at different angles of the wind attack for obtaining the curves of the aerodynamic coefficients depending on the impact angle. The numerical simulations of the wind tunnel testing were performed using the Unsteady Reynolds Averaged Navier-Stokes (RANS) method, k-ω SST turbulence model was assumed. Keywords: U-shaped beams; porosity; wind tunnel; RANS simulation; k-ω SST model Available in digital repository of the ASCR
Determination of aerodynamic coefficients for air flow around U-profiles with different flange porosities

Our contribution presents the comparison of the experimental investigations and of the numerical 2D simulations of the air flow around U –profiles having different flange porosities. The U-shaped ...

Ledvinková, Blanka; Hračov, Stanislav; Macháček, Michael
Ústav teoretické a aplikované mechaniky, 2022

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases