Ne (53)
Použitá omezení
(3)
Počet nalezených dokumentů:
53
Publikováno od
do
SIEMENS ‘FLYEYE‘ prototype lens results within a project 3SU1
Doleček, Roman; Melich, Radek; Macner, David
2014 - anglický
The aim of this study is to design and prototype a lens that enable a decrease of the light intensity that radiate into forward direction (90°) and at the same time increase the FWHM of the irradiated pattern.
Klíčová slova:
Flyeye lens; illumination
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
SIEMENS ‘FLYEYE‘ prototype lens results within a project 3SU1
The aim of this study is to design and prototype a lens that enable a decrease of the light intensity that radiate into forward direction (90°) and at the same time increase the FWHM of the irradiated ...
Witness sample of M1 protrusion
Melich, Radek; Psota, Pavel; Rail, Zdeněk; Franců, Helena; Hadincová, Ivana
2014 - anglický
Development of the technological process of M1 protrusion witness samples with a characteristic surface strength > 70MPa and realization of technology demonstrators.
Klíčová slova:
M1 protrusion; characteristic strength; METIS
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Witness sample of M1 protrusion
Development of the technological process of M1 protrusion witness samples with a characteristic surface strength > 70MPa and realization of technology demonstrators.
Microroughness of the superpolished coated sample
Melich, Radek; Kovačičinová, Jana; Lédl, Vít; Matoušek, Ondřej; Pintr, Pavel; Pleštil, Jan; Polák, Jaroslav; Possolt, Martin; Procháska, František; Psota, Pavel; Rail, Zdeněk; Tomka, David; Vít, Tomáš
2014 - anglický
This document describes a test of microroughness change after coating of the representative sample of the METIS mirror surface with respect to microroughness.
Klíčová slova:
microroughness; coating; METIS
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Microroughness of the superpolished coated sample
This document describes a test of microroughness change after coating of the representative sample of the METIS mirror surface with respect to microroughness.
Analysis and synthesis of optical performance of given material
Kovačičinová, Jana; Pintr, Pavel
2014 - anglický
Development of measurement process of optical performance of given material
Klíčová slova:
measurement; optical performance
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Analysis and synthesis of optical performance of given material
Development of measurement process of optical performance of given material
METIS – Design report - mirrors
Lédl, Vít; Melich, Radek; Psota, Pavel; Steiger, Lukáš; Vít, Tomáš; Kovačičinová, Jana
2013 - anglický
The presented study shows results from the mechanical design of M1 and M2 mirrors for METIS/ICOR. The study compares the material properties of different materials, which are often used for manufacturing of
Klíčová slova:
METIS; lightweighted mirrors; low microroughness
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
METIS – Design report - mirrors
The presented study shows results from the mechanical design of M1 and M2 mirrors for METIS/ICOR. The study compares the material properties of different materials, which are often used for ...
Illumination study of 3SU1 project
Melich, Radek; Vojtíšek, Petr; Mach, M.
2013 - anglický
This document provides report of results obtained during measurement of Siemens 3SU1 PLCompact, 3SU1 PLModular nad PCB indicators and their comparison to 3SB3 and Allan Bradley pilot lights.
Klíčová slova:
angular radiation measurement
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Illumination study of 3SU1 project
This document provides report of results obtained during measurement of Siemens 3SU1 PLCompact, 3SU1 PLModular nad PCB indicators and their comparison to 3SB3 and Allan Bradley pilot lights.
Contribution to ASPIICS Coronagraph on PROBA3
Melich, Radek; Psota, Pavel; Steiger, Lukáš; Vít, Tomáš; Kovačičinová, Jana
2013 - anglický
The aim of the document is to present design and technical notes on evaluation, manufacturing, and measurement of individual components and assembly methods of the Optical Objectives Assembly (OOA) of ASPIICS coronagraph for PROBA3.
Klíčová slova:
ASPIICS; optical design; PROBA3
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Contribution to ASPIICS Coronagraph on PROBA3
The aim of the document is to present design and technical notes on evaluation, manufacturing, and measurement of individual components and assembly methods of the Optical Objectives Assembly (OOA) of ...
Toptec Welding Process Visualization Instrument
Vojtíšek, Petr
2013 - anglický
MAG welding is characterized by very rapid processes in extreme condition of electric arc. To describe welding is necessary to use sufficiently quick equipment. Especially in the transition region between dip and spray transfer the processes develop quickly. Characterization of transition area in active three component shielding gas was carried out visually by hi speed camera equipment and electrically by quick response electronic measurement system
Klíčová slova:
Welding visualiation
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Toptec Welding Process Visualization Instrument
MAG welding is characterized by very rapid processes in extreme condition of electric arc. To describe welding is necessary to use sufficiently quick equipment. Especially in the transition region ...
Design, manufacture and test of M1 and M2 mirror production
Lédl, Vít; Melich, Radek; Pintr, Pavel; Polák, Jaroslav; Procháska, František; Psota, Pavel; Rail, Zdeněk; Steiger, Lukáš; Tomka, David; Václavík, Jan; Vápenka, David; Vít, Tomáš; Bartoníček, Jiří
2013 - anglický
Design and tests for realization of M1 and M2 mirrors for METIS project.
Klíčová slova:
METIS; lightweingted mirrors; low microroughness
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Design, manufacture and test of M1 and M2 mirror production
Design and tests for realization of M1 and M2 mirrors for METIS project.
Preliminary design of imaging system without zoom
Melich, Radek; Lédl, Vít
2012 - anglický
The aim of the report is to provide the preliminary design and simulations of an imaging system without zoom in accordance to the provided mechanical dimensions. The simulations will result in spot diagrams for various field objects. Finally, the optical transmission efficiency for optical design will be provided. All designed systems will be discussed with respect to their simulated performances and recommendation for final selected system will be provided.
Klíčová slova:
imaging system; electron beam microscopy
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Preliminary design of imaging system without zoom
The aim of the report is to provide the preliminary design and simulations of an imaging system without zoom in accordance to the provided mechanical dimensions. The simulations will result in spot ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze