No (11866)
Number of found documents:
11866
Published from
to
Dynamic tensile experiments of hard rubber on instron test machine under finite deformations
Šulc, Petr; Pešek, Luděk; Bula, Vítězslav; Šnábl, Pavel
2023 - English
This paper deals with the first experimental tests of hard rubbers under tensile harmonic loading on the axial-torsional servohydraulic Instron 8852 test machine. The objective of these experiments on cylindrical rubber specimens on this machine is to obtain stress-strain curves of rubber specimens, first considering uniaxial finite longitudinal strains for a single load cycle. Next, the hysteresis loops and their skeleton curves are compared for two selected strain measures as a function of their conjugate stress. It is shown how to obtain the dependence between elongation in the axial direction and constriction in the radial direction, which is used to determine the Cauchy stress in this configuration.
Keywords:
uniaxial harmonic loading; finite deformation; second Piola-Kirchhoff stress; hysteresis loop; Green-Lagrange strain tensor
Available at various institutes of the ASCR
Dynamic tensile experiments of hard rubber on instron test machine under finite deformations
This paper deals with the first experimental tests of hard rubbers under tensile harmonic loading on the axial-torsional servohydraulic Instron 8852 test machine. The objective of these experiments on ...
Identification of quasiperiodic processes in the vicinity of the resonance
Fischer, Cyril; Náprstek, Jiří
2023 - English
In nonlinear dynamical systems, strong quasiperiodic beating effects appear due to combination of self-excited and forced vibration. The presence of symmetric or asymmetric beatings indicates an exchange of energy between individual degrees of freedom of the model or by multiple close dominant frequencies. This effect is illustrated by the case of the van der Pol equation in the vicinity of resonance. The approximate analysis of these nonlinear effects uses the harmonic balance method and the multiple scale method.
Keywords:
dynamical systems; quasiperiodic response; van der Pol equation
Available at various institutes of the ASCR
Identification of quasiperiodic processes in the vicinity of the resonance
In nonlinear dynamical systems, strong quasiperiodic beating effects appear due to combination of self-excited and forced vibration. The presence of symmetric or asymmetric beatings indicates an ...
Laboratory X-ray imaging in material sciences
Koudelka_ml., Petr; Kytýř, Daniel; Jiroušek, O.
2023 - English
In recent decades, X-ray imaging and computed (micro)tomography (XCT) in particular have become common tools for volumetric inspection, visualization, and analysis of internal structure in materials from various fields [1]. In this lecture, we will explore various applications of laboratory X-ray imaging chains utilizing the combination of tomographical imaging with mechanical, thermal, or chemical loading of the irradiated sample in a so-called time-resolved imaging allowing for unprecedented insight into different phenomena driving fundamental processes encountered in various fields of material science. We will show that failure processes in engineering or geological materials [2] can be thoroughly studied by synergy of information from radiographical imaging and other methods including acoustic emission detection and optical measurements via high-speed visible-spectrum and thermal-imaging cameras, where the radiography provides important spatial information regarding deformation processes evolving within the tested samples that could not be obtained otherwise. The state-of-the-art the laboratory based imaging chains for investigation of dynamic response of materials under loading will be also discussed including high speed X-ray radiography utilizing a powerful X-ray source during high velocity impact as an approach suitable for inspection of an impacted sample. As an alternative to both conventional high-power sources and accelerator facilities, capabilities of a flash X-ray system developed primarily for in-situ ballistics research providing very short bursts of an extremely powerful intermittent X-ray radiation with a typical duration of dozens of nanoseconds will be shown.
Keywords:
X-ray imaging; material characterization; mechanical properties
Available at various institutes of the ASCR
Laboratory X-ray imaging in material sciences
In recent decades, X-ray imaging and computed (micro)tomography (XCT) in particular have become common tools for volumetric inspection, visualization, and analysis of internal structure in materials ...
Aerodynamic Measurements on Subsonic Compressor Blade Cascades KR-D-7 and KR-D-8
Šimurda, David; Hála, Jindřich; Luxa, Martin; Radnic, Tomáš
2023 - English
This report contains results and evaluation of aerodynamic measurements conducted on two variant subsonic compressor blade cascades with MCA profile (KR-D-7) and DCA profile (KR-D-8) at transonic flow regimes.
Keywords:
compressor blade cascade; experiment; transonic flow; subsonic flow; MCA profile; DCA profile
Available at various institutes of the ASCR
Aerodynamic Measurements on Subsonic Compressor Blade Cascades KR-D-7 and KR-D-8
This report contains results and evaluation of aerodynamic measurements conducted on two variant subsonic compressor blade cascades with MCA profile (KR-D-7) and DCA profile (KR-D-8) at transonic flow ...
Aerodynamic Measurements on Transonic Compressor Blade Cascades KR-D-9 and KR-D-10
Šimurda, David; Hála, Jindřich; Luxa, Martin
2023 - English
This report contains results and evaluation of aerodynamic measurements conducted on two variant transonic compressor blade cascades with MCA profile (KR-D-10) and DCA profile (KR-D-9) at transonic flow regimes.
Keywords:
compressor blade cascade; experiment; transonic flow; MCA profile; DCA profile
Available at various institutes of the ASCR
Aerodynamic Measurements on Transonic Compressor Blade Cascades KR-D-9 and KR-D-10
This report contains results and evaluation of aerodynamic measurements conducted on two variant transonic compressor blade cascades with MCA profile (KR-D-10) and DCA profile (KR-D-9) at transonic ...
Vowel length in infant-directed speech: the realisation of short-long contrasts in Czech IDS
Svoboda, Michaela; Chládková, Kateřina; Kocjančič Antolík, T.; Paillereau, Nikola; Slížková, P.
2023 - English
When interacting with young children, talkers across many languages use a speech style that reflects positive affect, draws infants' attention, and supposedly facilitates language acquisition. As for the latter, a well-documented feature of infant-directed speech is an exaggeration of spectrally-cued vowel contrasts. Here we tested whether talkers exaggerate also durationally cued contrasts. Sixty-three mothers, native speakers of Czech, were recorded while playing with their infant (4- to 10-month-olds, IDS) and while speaking to an adult (ADS). The durations of the five Czech phonemically short vowels were compared to their long counterparts. Vowel duration (normalised for word duration) was longer in IDS than in ADS more for phonemically long vowels at the younger infant ages, indicating a developmentally specific early exaggeration of length contrasts in Czech infant-directed speech. The present finding suggests that in a language with phonemic length, caregivers' realisation of speech sounds may go beyond merely being longer and slower overall.
Keywords:
infant-directed speech; vowel length; development of early input; Czech
Available on request at various institutes of the ASCR
Vowel length in infant-directed speech: the realisation of short-long contrasts in Czech IDS
When interacting with young children, talkers across many languages use a speech style that reflects positive affect, draws infants' attention, and supposedly facilitates language acquisition. As for ...
Structural analysis of polysaccharides from mushroom hericium Erinaceus mftccb 134
Bleha, R.; Čopíková, J.; Sushytskyi, Leonid; Vannucci, Luca; Sinica, A.; Jozífek, M.; Jablonský, I.; Klouček, P.
2023 - English
The aim of this research was the structural characterisation of polysaccharides isolated from fruiting bodies of the cultivating medicinal mushroom Hericium erinaceus MFTCCB 134. Cold and hot water extracts (CWE, HWE) were obtained and purified, and followed by alkali extraction from the reminder solids. The composition and structure of the fractions were analysed by FTIR spectroscopy, and neutral sugars/linkage analyses were determined by GC/FID and GC/MS, respectively. Galactose, fucose and glucose were found in purified CWE,\nwhile glucose predominated in purified HWE.
Keywords:
Hericium erinaceus; polysaccharides; mushrooms
Available at various institutes of the ASCR
Structural analysis of polysaccharides from mushroom hericium Erinaceus mftccb 134
The aim of this research was the structural characterisation of polysaccharides isolated from fruiting bodies of the cultivating medicinal mushroom Hericium erinaceus MFTCCB 134. Cold and hot water ...
Jánovce. Paleomagnetic research. Report
Elbra, Tiiu; Kdýr, Šimon; Uçar, Hakan; Pruner, Petr; Schnabl, Petr
2023 - English
Keywords:
Jánovce archeological site; Paleomagnetism; Rock magnetism
Available at various institutes of the ASCR
Jánovce. Paleomagnetic research. Report
Fish stock survey of the Lake Sevan in 2023 – catch summary report
Prchalová, Marie
2023 - English
Catch summary report on survey of fish stock of the Lake Sevan in July 2023.\n
Keywords:
gillnets; hydroacoustics; biomass
Available at various institutes of the ASCR
Fish stock survey of the Lake Sevan in 2023 – catch summary report
Catch summary report on survey of fish stock of the Lake Sevan in July 2023.\n
Enhanced growth rate of diamond films at low temperature in focused microwave plasma system
Babčenko, Oleg; Bydžovská, Irena; Fait, Jan; Shagieva, Ekaterina; Ondič, Lukáš; Kromka, Alexander
2023 - English
The low temperature (< 500 °C) diamond film deposition on fused silica in two different focused microwave plasma systems, i.e. a multimode clamshell cavity (MCC) and a rotational ellipsoid cavity (REC) reactor, was investigated. During the experiments, the methane to hydrogen ratio, in the hydrogen-rich process gas mixture, varied from 1 % to 15 % for MCC and from 1 % to 9 % for REC. The grown films were analyzed by scanning electron microscopy and Raman shift measurements. The outcomes of the study and enhanced diamond growth at low temperatures is advantageous for overcoating of fused silica as well as thermally sensitive substrates, e.g. optical elements, photonic crystals, sensors, etc.
Keywords:
well-faceted diamonds; low temperature deposition; high growth rate; low non-diamond content; focused plasma
Available at various institutes of the ASCR
Enhanced growth rate of diamond films at low temperature in focused microwave plasma system
The low temperature (...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases