Mechanical properties of a fabric reinforced carbon-carbon composite
Starý, V.; Černý, Martin; Glogar, Petr; Houška, L.; Kotek, Jiří; Nevoralová, M.
2001 - English Mechanical properties of plain weave, twill and satin reinforced carbon-carbon composites were investigated in dependence of their heat treatment temperature and impregnation. Keywords: mechanical properties; carbon-carbon composites Available at various institutes of the ASCR Mechanical properties of a fabric reinforced carbon-carbon composite

Mechanical properties of plain weave, twill and satin reinforced carbon-carbon composites were investigated in dependence of their heat treatment temperature and impregnation.

Starý, V.; Černý, Martin; Glogar, Petr; Houška, L.; Kotek, Jiří; Nevoralová, M.
Ústav struktury a mechaniky hornin, 2001

Cages Based on Carbon-Carbon Composite
Sochor, M.; Balík, Karel; Tichý, P.; Španiel, M.; Vtípil, J.
2001 - English A project developing intervertebral implants based on a C-C composites was initiated by some extraordinary characteristics of this material. Keywords: C-C composite; mechanical testing; biocompatibility Available at various institutes of the ASCR Cages Based on Carbon-Carbon Composite

A project developing intervertebral implants based on a C-C composites was initiated by some extraordinary characteristics of this material.

Sochor, M.; Balík, Karel; Tichý, P.; Španiel, M.; Vtípil, J.
Ústav struktury a mechaniky hornin, 2001

Toxic elements in cokes and tars from copyrolysis
Straka, Pavel; Kříž, Vlastimil; Endrýsová, Jana
2001 - English Toxic elements in tars and cokes from copyrolysis of coal with waste polymers were investigated. Tars can be used as heatings oils, because teh content of toxic elements was low. Use of cokes as smokeless fuel can be problematic, because content of Pb was rather high. Available at various institutes of the ASCR Toxic elements in cokes and tars from copyrolysis

Toxic elements in tars and cokes from copyrolysis of coal with waste polymers were investigated. Tars can be used as heatings oils, because teh content of toxic elements was low. Use of cokes as ...

Straka, Pavel; Kříž, Vlastimil; Endrýsová, Jana
Ústav struktury a mechaniky hornin, 2001

Oxygen resistivity of 2-D composites based on E-glass and siloxane
Balík, Karel; Černý, Martin; Kolář, František; Křena, J.
2001 - English 2-D composites prepared from glassy fabric and siloxane resin as a matrix were cured and subjected to pyrolysis at 400, 500, 600řC in nitrogen. Materials were oxidized in dried air at 400 and 700řC for a period of 1h. Keywords: composites Available at various institutes of the ASCR Oxygen resistivity of 2-D composites based on E-glass and siloxane

2-D composites prepared from glassy fabric and siloxane resin as a matrix were cured and subjected to pyrolysis at 400, 500, 600řC in nitrogen. Materials were oxidized in dried air at 400 and 700řC ...

Balík, Karel; Černý, Martin; Kolář, František; Křena, J.
Ústav struktury a mechaniky hornin, 2001

Applied for Assesing the Stres Distribution in the Intervertebral Cages
Sochor, M.; Balík, Karel; Tichý, P.; Španiel, M.; Vtípil, J.
2001 - English A project developing intervertebral implants based on a C-C composites was initiated by some extraordinary characteristics of this material. FEM was applied for assesing the stress distribution in the intervertebral cages. Keywords: finite element method; carbon-carbon composite; mechanical testing Available at various institutes of the ASCR Applied for Assesing the Stres Distribution in the Intervertebral Cages

A project developing intervertebral implants based on a C-C composites was initiated by some extraordinary characteristics of this material. FEM was applied for assesing the stress distribution in the ...

Sochor, M.; Balík, Karel; Tichý, P.; Španiel, M.; Vtípil, J.
Ústav struktury a mechaniky hornin, 2001

Experiments Proposed when Developing Cages Based on Carbon-Carbon Composites
Sochor, M.; Balík, Karel; Sedláček, R.; Tichý, P.; Vtípil, J.
2001 - English A project developing intervertebral implants based on a C-C composites was initiated by some extraordinary characteristics of this material. Keywords: C-C composite; mechanical testing; biocompatibility Available at various institutes of the ASCR Experiments Proposed when Developing Cages Based on Carbon-Carbon Composites

A project developing intervertebral implants based on a C-C composites was initiated by some extraordinary characteristics of this material.

Sochor, M.; Balík, Karel; Sedláček, R.; Tichý, P.; Vtípil, J.
Ústav struktury a mechaniky hornin, 2001

Grafitické fylity devonských sérií Hrubého Jeseníku
René, Miloš
2000 - English Available at various institutes of the ASCR Grafitické fylity devonských sérií Hrubého Jeseníku

René, Miloš
Ústav struktury a mechaniky hornin, 2000

Tin-bearing granites of the Horní Slavkov area
René, Miloš
2000 - English Tin-bearing granites of the Horní Slavkov area are a part of the Krudum massif, independent magmatic body on the southwestern margin of the Karlovy Vary pluton. Tin bearing topaz-albite granite originated by means of progressive fractional crystallization from peraluminous granitic melt, which produced topaz-bearing two-mica granites. The origin of the granite stocks was associated with fluid fractionation leading to the origin of zoning in the development of tin-bearing granites. Available at various institutes of the ASCR Tin-bearing granites of the Horní Slavkov area

Tin-bearing granites of the Horní Slavkov area are a part of the Krudum massif, independent magmatic body on the southwestern margin of the Karlovy Vary pluton. Tin bearing topaz-albite granite ...

René, Miloš
Ústav struktury a mechaniky hornin, 2000

Utilization of solid biomass waste through co-pyrolysis with coal
Čermáková, Petra; Buchtele, Jaroslav
2000 - English Solid biomass yields a valuable products while it is copyrolyzed together with coal. The main product, carbonaceous solid rest, can serve as an industrial sorbent or smokeless fuel. Available at various institutes of the ASCR Utilization of solid biomass waste through co-pyrolysis with coal

Solid biomass yields a valuable products while it is copyrolyzed together with coal. The main product, carbonaceous solid rest, can serve as an industrial sorbent or smokeless fuel.

Čermáková, Petra; Buchtele, Jaroslav
Ústav struktury a mechaniky hornin, 2000

Removal of inorganic sulphur, arsenic and iron from coal by Thiobacillus ferrooxidans
Kupka, D.; Čurillová, D.; Machajová, Z.; Sýkorová, Ivana
2000 - English The aim of the work was a research of the potential application of Thiobacillus ferrooxidans in desulphurisation of coals, decrease arsenic, iron content and identification chenges of organic matter by optical microscopy as a possible way to decrease environmental emissions. Keywords: coal; sulfur Available at various institutes of the ASCR Removal of inorganic sulphur, arsenic and iron from coal by Thiobacillus ferrooxidans

The aim of the work was a research of the potential application of Thiobacillus ferrooxidans in desulphurisation of coals, decrease arsenic, iron content and identification chenges of organic matter ...

Kupka, D.; Čurillová, D.; Machajová, Z.; Sýkorová, Ivana
Ústav struktury a mechaniky hornin, 2000