No (7621)
Yes (1642)
Number of found documents:
9263
Published from
to
Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study
Buryi, Maksym; Král, Robert
2023 - English
The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international collaborations. In particular, the advanced methods of the (nano)materials synthesis, fabrication, and characterization are presented and discussed in detail. The aim of the seminar is to establish more of the effective paths of communication and data exchange by creating and maintaining links among the teams of national and international experts in various fields of physical and chemical knowledge, both experimental and theoretical.
Keywords:
nanomaterials; synthesis; data exchange
Fulltext is available at external website.
Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study
The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international ...
Stereolithography for manufacturing of advanced porous solids
Drechslerová, V.; Neuhäuserová, M.; Falta, J.; Šleichrt, J.; Kytýř, Daniel
2023 - English
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high absorption of impact energy. SLA is an additive manufacturing technology employing the principle of liquid resins curing moderated by radiation of a wavelength from ultra-violet band where resulting material parameters are tunable by setting of the curing process. The batches of samples manufactured using three different resins were subjected to quasi-static uni-axial tensile and compression tests. Acquired data were processed to derive deformation behaviour expressed as stress-strain diagrams and fundamental material properties. Based on the knowledge obtained from the mechanical tests, the setup of the fabrication parameters, the most suitable resin for manufacturing of the lattice structures and the overall suitability of SLA technology for the fabrication of advanced porous materials, were determined.
Keywords:
stereolithography; advanced porous materials; quasi-static testing; resin; mechanical characteristics
Available at various institutes of the ASCR
Stereolithography for manufacturing of advanced porous solids
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high ...
A new blade cascade for flutter studies
Šnábl, Pavel; Pešek, Luděk; Procházka, Pavel P.; Skála, V.
2023 - English
In this paper, a new blade cascade, developed in the Institute of Thermomechanics, is presented. The geometry of the cascade was modified so now the stall flutter can occur. It has some major construction improvements over the original cascade which now allow more precise and reliable measurements. The stability of the new blade cascade with five NACA 0010 profiles with rotational degree of freedom is assessed by Travelling Wave Mode approach and Aerodynamic Influence Coefficient approach.
Keywords:
blade cascade; stability; travelling wave mode; aerodynamic influence coefficient
Available at various institutes of the ASCR
A new blade cascade for flutter studies
In this paper, a new blade cascade, developed in the Institute of Thermomechanics, is presented. The geometry of the cascade was modified so now the stall flutter can occur. It has some major ...
Bohl-Marek decomposition applied to a class of biochemical networks with conservation properties
Papáček, Štěpán; Matonoha, Ctirad; Duintjer Tebbens, Jurjen
2023 - English
This study presents an application of one special technique, further called as Bohl-Marek decomposition, related to the mathematical modeling of biochemical networks with mass conservation properties. We continue in direction of papers devoted to inverse problems of parameter estimation for mathematical models describing the drug-induced enzyme production networks [3]. However, being aware of the complexity of general physiologically based pharmacokinetic (PBPK) models, here we focus on the case of enzyme-catalyzed reactions with a substrate transport chain [5]. Although our ultimate goal is to develop a reliable method for fitting the model parameters to given experimental data, here we study certain numerical issues within the framework of optimal experimental design [6]. Before starting an experiment on a real biochemical network, we formulate an optimization problem aiming to maximize the information content of the corresponding experiment. For the above-sketched optimization problem, the computational costs related to the two formulations of the same biochemical network, being (i) the classical formulation x˙(t) = Ax(t) + b(t) and (ii) the 'quasi-linear' Bohl-Marek formulation x˙M(t) = M(x(t)) xM(t), can be determined and compared.
Keywords:
Mathematical modeling; Biochemical network; Pharmacokinetic (PBPK) models
Fulltext is available at external website.
Bohl-Marek decomposition applied to a class of biochemical networks with conservation properties
This study presents an application of one special technique, further called as Bohl-Marek decomposition, related to the mathematical modeling of biochemical networks with mass conservation properties. ...
Validation of numerical simulations of a simple immersed boundary solver for fluid flow in branching channels
Keslerová, R.; Lancmanová, Anna; Bodnár, Tomáš
2023 - English
This work deals with the flow of incompressible viscous fluids in a two-dimensional branching channel. Using the immersed boundary method, a new finite difference solver was developed to interpret the channel geometry. The numerical results obtained by this new solver are compared with the numerical simulations of the older finite volume method code and with the results obtained with OpenFOAM. The aim of this work is to verify whether the immersed boundary method is suitable for fluid flow in channels with more complex geometries with difficult grid generation.
Keywords:
immersed boundary method; finite volume method; OpenFOAM
Available in digital repository of the ASCR
Validation of numerical simulations of a simple immersed boundary solver for fluid flow in branching channels
This work deals with the flow of incompressible viscous fluids in a two-dimensional branching channel. Using the immersed boundary method, a new finite difference solver was developed to interpret the ...
Rooting algebraic vertices of convergent sequences
Hartman, David; Hons, T.; Nešetřil, J.
2023 - English
Structural convergence is a framework for convergence of graphs by Nešetřil and Ossona de Mendez that unifies the dense (left) graph convergence and Benjamini-Schramm convergence. They posed a problem asking whether for a given sequence of graphs (Gn) converging to a limit L and a vertex r of L it is possible to find a sequence of vertices (rn) such that L rooted at r is the limit of the graphs Gn rooted at rn. A counterexample was found by Christofides and Král’, but they showed that the statement holds for almost all vertices r of L. We offer another perspective to the original problem by considering the size of definable sets to which the root r belongs. We prove that if r is an algebraic vertex (i.e. belongs to a finite definable set), the sequence of roots (rn) always exists.
Keywords:
rooting; algebraic vertices; convergent sequences
Available in digital repository of the ASCR
Rooting algebraic vertices of convergent sequences
Structural convergence is a framework for convergence of graphs by Nešetřil and Ossona de Mendez that unifies the dense (left) graph convergence and Benjamini-Schramm convergence. They posed a problem ...
Drivers of Private Equity Activity across Europe: An East-West Comparison
Kočenda, Evžen; Shivendra, R.
2023 - English
We investigate the key macroeconomic and institutional determinants of fundraising and investment activities and compare them across Europe, covering 13 Central and Eastern European (CEE) and 16 Western European (WE) countries. Five macroeconomic variables and nineteen institutional variables are selected. These variables are studied using panel data analysis with fixed effects and random effects models over an eleven-year observation period (2010–2020). Bayesian Model Averaging (BMA) is applied to select the key variables. Our results suggest that macroeconomic variables have no significant impact on fundraising and investment activity in either region. Investment activity is a significant driver of fundraising across Europe. Similarly, fundraising and divestment activity are significant drivers of investments across Europe. Institutional variables, however, affect fundraising and investment activity differently. While investment freedom has a significant effect on funds raised in the WE and CEE countries, government integrity and trade freedom are both significant determinants of investments in both European regions. In addition, the results demonstrate that, in contrast to the WE region, fundraising in the CEE region is not country specific. We investigate the key macroeconomic and institutional determinants of fundraising and investment activities and compare them across Europe, covering 13 Central and Eastern European (CEE) and 16 Western European (WE) countries. Five macroeconomic variables and nineteen institutional variables are selected. These variables are studied using panel data analysis with fixed effects and random effects models over an eleven-year observation period (2010–2020). Bayesian Model Averaging (BMA) is applied to select the key variables. Our results suggest that macroeconomic variables have no significant impact on fundraising and investment activity in either region. Investment activity is a significant driver of fundraising across Europe. Similarly, fundraising and divestment activity are significant drivers of investments across Europe. Institutional variables, however, affect fundraising and investment activity differently. While investment freedom has a significant effect on funds raised in the WE and CEE countries, government integrity and trade freedom are both significant determinants of investments in both European regions. In addition, the results demonstrate that, in contrast to the WE region, fundraising in the CEE region is not country specific.
Keywords:
Private equity; Fundraising; Investment
Fulltext is available at external website.
Drivers of Private Equity Activity across Europe: An East-West Comparison
We investigate the key macroeconomic and institutional determinants of fundraising and investment activities and compare them across Europe, covering 13 Central and Eastern European (CEE) and 16 ...
Effect of aging on mechanical properties of 3D printed samples using stereolithography
Drechslerová, V.; Falta, J.; Fíla, T.; Dvořák, R.; Kytýř, Daniel
2023 - English
This paper focuses on stereolithography (an additive manufacturing technology working on the principle of curing liquid resins layer by layer using ultraviolet radiation) and the effect of aging on the mechanical properties of the material and printed samples. The aging of the material could be a problem for its subsequent use as the stability of the mechanical properties would not be maintained and unwanted deterioration of the material could occur. As part of the research, sets of samples were printed and subjected to different aging methods and subsequently subjected to quasi-static and dynamic uni-axial load tests. From the data obtained, the basic mechanical properties of the material were calculated and compared with each other. The aim of this paper was to investigate whether aging process causes significant changes in the mechanical properties of the materials used, which could have a consequential impact on their use in different industries.
Keywords:
stereolithography; aging; mechanical properties
Available at various institutes of the ASCR
Effect of aging on mechanical properties of 3D printed samples using stereolithography
This paper focuses on stereolithography (an additive manufacturing technology working on the principle of curing liquid resins layer by layer using ultraviolet radiation) and the effect of aging on ...
Computed tomography system with strict real-time synchronization for in-situ 3D analysis of periodically vibrating objects
Rada, Václav; Fíla, Tomáš; Zlámal, Petr; Koudelka_ml., Petr; Šleichrt, Jan; Macháček, Michael; Vavřík, Daniel; Kytýř, Daniel
2023 - English
In the contribution, we present a laboratory system capable of X-ray computed tomography (XCT) scanning of an periodically moving or oscillating object. The system is an in-house developed XCT setup with electromagnetic voice coil actuator mounted on top of the rotary stage of the setup. The strict synchronization of the components, the rotary stage, the electromagnetic actuator movement and the detector readout is accomplished with use of the detector hardware trigger and hard real-time Linux operating system. Cylindrical sample manufactured from epoxy resin with metal particles to enable movement tracking is scanned in a stationary position and during periodical movement induced by the vibration stage. The volumetric data of the scans is compared and the results of this contribution represent an important step towards identification of defects through modal analysis of in-situ harmonically vibrating object.
Keywords:
computed tomography; hardware trigger; harmonic motion; realtime synchronization
Available at various institutes of the ASCR
Computed tomography system with strict real-time synchronization for in-situ 3D analysis of periodically vibrating objects
In the contribution, we present a laboratory system capable of X-ray computed tomography (XCT) scanning of an periodically moving or oscillating object. The system is an in-house developed XCT setup ...
Analysis suggestion for vehicle scanning method
Bayer, Jan
2023 - English
An analytical approach is suggested that can be conveniently applied in the framework of the Vehicle scanning method (VSM). It assumes that the modal parameters of a bridge will be imported from a finite element (FE) program into MATLAB, where the structural response caused by a moving mass and a moving spring mass is solved using coupling equations and numerical integration. A mathematical formulation of the solution is presented together with a short numerical case study that compares the results to a traditional closed form solution. It is shown that when comparing both forms of analysis the suggested approach is more accurate in the case of slow velocities of the passing sprung mass. Other advantages are that the method allows for the mass of the vehicle or (tractor) towing vehicle and a damping \nto be included in the calculation. The user-friendly preprocessing in commercial FE programs can also be considered an advantage.
Keywords:
moving vehicle; vehicle scanning method; natural frequency; finite element analysis
Available at various institutes of the ASCR
Analysis suggestion for vehicle scanning method
An analytical approach is suggested that can be conveniently applied in the framework of the Vehicle scanning method (VSM). It assumes that the modal parameters of a bridge will be imported from a ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases