Used filters (2)  Zrušit všechna omezení
Number of found documents: 6258
Published from to

Hydrobiological report on the Vrchlice reservoir focusing on fish and phytoplankton
Čech, Martin; Vejřík, Lukáš; Rychtecký, Pavel; Jezberová, Jitka; Kozlíková, Eliška; Znachor, Petr
2023 - Czech
The report summarizes two first years of the research of Vrchlice Reservoir in a trophic level of fish and phytoplankton Zpráva sumarizuje první dva roky výzkumu nádrže Vrchlice v trofické úrovni ryb a fytoplanktonu. Keywords: diversity; fish; phytoplankton; biomass; abundance; long-lines; electrofishing; gillnets Available at various institutes of the ASCR
Hydrobiological report on the Vrchlice reservoir focusing on fish and phytoplankton

The report summarizes two first years of the research of Vrchlice Reservoir in a trophic level of fish and phytoplankton

Čech, Martin; Vejřík, Lukáš; Rychtecký, Pavel; Jezberová, Jitka; Kozlíková, Eliška; Znachor, Petr
Biologické centrum, 2023

Fish stock assessment of Lake Sauka in 2022
Muška, Milan; Kočvara, Luboš; Sajdlová, Zuzana; Jůza, Tomáš; Soukalová, Kateřina
2023 - Czech
Fish monitoring using trawling, beach seining, electrofishing and hydroacoustic described the spatial and temporal distribution of fish populations in littoral and pelagic habitats in Lake Sauka. Zpráva shrnuje výsledky průzkumu rybích populací jezera Sauka za použití vlečných a zátahových sítí, elekrolovu a hydroakustiky. Cílem průzkumu bylo popsat prostorovou distribuci populací ryb v příbřežních a pelagických habitatech jezera ve dne a v noci. Keywords: fish; community; diversity Available at various institutes of the ASCR
Fish stock assessment of Lake Sauka in 2022

Fish monitoring using trawling, beach seining, electrofishing and hydroacoustic described the spatial and temporal distribution of fish populations in littoral and pelagic habitats in Lake Sauka.

Muška, Milan; Kočvara, Luboš; Sajdlová, Zuzana; Jůza, Tomáš; Soukalová, Kateřina
Biologické centrum, 2023

Study of the limnological components of the ecosytem of Lake Medard in 2022
Peterka, Jiří; Hejzlar, Josef; Nedoma, Jiří; Znachor, Petr; Seďa, Jaromír; Vejřík, Lukáš
2023 - Czech
The report summarizes the results of research into the limnological and biological components of the ecosystem of the newly created Medard post-mining lake. The aim of the presented report is to summarize the results achieved for the year 2022 and recommendations for further monitoring. The year 2022 was the fifth year after the lake was completely filled, when water from the Ohře River was no longer added. Only small tributaries flowed into the lake from its own catchment area, and at the same time, water from the lake drained through seeps, which are apparently drained into the nearby rivers, the Ohře and the Svatava. The lake ecosystem reached the final state of its initial phase in terms of hydrological regime and nutrient load. This condition is characterized by very little water exchange and a low nutrient level with low productivity of plankton communities. There is the development of submerged macrovegetation in littoral zone and a specific seasonal change in chemistry and biological parameters. However, the aquatic ecosystem is still far from stabilized and the biological communities of the littoral zone (littoral) and open water (pelagial), including the fish community, still show significant interannual dynamics. Zpráva shrnuje výsledky výzkumu limnologických a biologických složek ekosystému nově vzniklého důlního jezera Medard. Cílem předkládané zprávy je sumarizace dosažených výsledků za rok 2022 a doporučení pro další sledování. Rok 2022 byl pátým rokem po úplném naplnění jezera, kdy již nedocházelo k napouštění vody z řeky Ohře. Do jezera přitékaly pouze drobné přítoky z jeho vlastního povodí a zároveň voda z jezera odtékala průsaky, které jsou zřejmě drénovány do blízkých říčních toků, Ohře a Svatavy. Ekosystém jezera se dostal z hlediska hydrologického režimu a živinového zatížení do finálního stavu své iniciální fáze. Pro tento stav je typická velmi malá obměna vody a nízká úroveň úživnosti s nízkou produktivitou planktonních společenstev. Dochází k rozvoji ponořené makrovegetace v příbřežních zónách a k specifické sezónní změně chemismu i biologických parametrů. Vodní ekosystém však ještě zdaleka není stabilizován a biologická společenstva příbřežní zóny (litorál) i volné vody (pelagiál), včetně společenstva ryb, stále vykazují výraznou meziroční dynamiku. Keywords: fish; diversity; community; nutrients; phytoplankton; zooplankton Available at various institutes of the ASCR
Study of the limnological components of the ecosytem of Lake Medard in 2022

The report summarizes the results of research into the limnological and biological components of the ecosystem of the newly created Medard post-mining lake. The aim of the presented report is to ...

Peterka, Jiří; Hejzlar, Josef; Nedoma, Jiří; Znachor, Petr; Seďa, Jaromír; Vejřík, Lukáš
Biologické centrum, 2023

Assessment of ichtyological survey in selected sites based on citizen science 'Save the Crucian Carp' in Vysocina region, along with genetic analyses of previously recorded populations
Šmejkal, Marek; Thomas, Kiran; Bartoň, Daniel; Gottwald, M.
2023 - Czech
The report summarizes the occurence of crucian carp in Vysocina region Zpráva shrnuje výsledky výzkumu výskytu karase obecného v regionu Vysočina Keywords: crucian carp; cyprinidae; freshwater conservation Available at various institutes of the ASCR
Assessment of ichtyological survey in selected sites based on citizen science 'Save the Crucian Carp' in Vysocina region, along with genetic analyses of previously recorded populations

The report summarizes the occurence of crucian carp in Vysocina region

Šmejkal, Marek; Thomas, Kiran; Bartoň, Daniel; Gottwald, M.
Biologické centrum, 2023

Monitoring of fish stock in Bolevecky pond in 2023
Draštík, Vladislav; Jůza, Tomáš; Blabolil, Petr
2023 - Czech
The report summarizes results of fish monitoring in Bolevecky pond using electrofishing device. Simoutaneously, the abundance of unfavorable fish species in terms of water quality were decreased. Futher recommendation for fish management and the need for future surveys were stated. Zpráva shrnuje výsledky průzkumu rybí obsádky Boleveckého rybníka v roce 2023 pomocí elektrického agregátu. Zároveň proběhlo odstranění nežádoucích druhů ryb s ohledem na kvalitu vody v rybníce. Sumarizace dosažených výsledků a návrh doporučení pro další sledování jsou obsahem předkládané zprávy. Keywords: Fish management; water quality; electrofishing Available at various institutes of the ASCR
Monitoring of fish stock in Bolevecky pond in 2023

The report summarizes results of fish monitoring in Bolevecky pond using electrofishing device. Simoutaneously, the abundance of unfavorable fish species in terms of water quality were decreased. ...

Draštík, Vladislav; Jůza, Tomáš; Blabolil, Petr
Biologické centrum, 2023

Monitoring of the population of Asp (Leuciscus aspius) in the Želivka Special Area of Conservation
Muška, Milan; Šmejkal, Marek; Bartoň, Daniel
2023 - Czech
The aim of the study was to obtain up-to-date information on the number and status of populations of the asp (Leuciscus aspius, L. 1758) in the Special Area of Conservation (SAC) Želivka. Cílem studie bylo získání aktuálních informací o početnosti a stavu populací bolena dravého (Leuciscus aspius, L. 1758) v evropsky významné lokalitě (EVL) Želivka. Keywords: freshwater conservation; cyprinidae; NATURA 2000 Available at various institutes of the ASCR
Monitoring of the population of Asp (Leuciscus aspius) in the Želivka Special Area of Conservation

The aim of the study was to obtain up-to-date information on the number and status of populations of the asp (Leuciscus aspius, L. 1758) in the Special Area of Conservation (SAC) Želivka.

Muška, Milan; Šmejkal, Marek; Bartoň, Daniel
Biologické centrum, 2023

SMV-2023-15: Development of brazed and welded joints of mechanical parts of electron microscopes
Zobač, Martin; Vlček, Ivan; Dupák, Libor; Rončák, Ján; Zobačová, Jitka
2023 - Czech
The project aimed to conduct in-depth research and development on permanent joints of metal materials using electron beam welding and vacuum brazing techniques. Additionally, the project focused on the development of thermal treatment procedures for these assemblies. As a result, specific technological procedures were established for the given assemblies. This project was a continuation of the previous development. Projekt se zaměřil na další výzkum a vývoj nerozebíratelných spojů kovových materiálů. Využíval technologii svařování elektronovým svazkem a technologii vakuového pájení, spolu s vývojem postupů pro tepelné zpracování komponent. Výsledkem projektu byly konkrétní technologické postupy vhodné pro sestavy částí elektronových mikroskopů. Tento projekt navazoval na práci provedenou v předchozích obdobích. Keywords: electron beam welding; vacuum brazing; electron microscopy Available at various institutes of the ASCR
SMV-2023-15: Development of brazed and welded joints of mechanical parts of electron microscopes

The project aimed to conduct in-depth research and development on permanent joints of metal materials using electron beam welding and vacuum brazing techniques. Additionally, the project focused on ...

Zobač, Martin; Vlček, Ivan; Dupák, Libor; Rončák, Ján; Zobačová, Jitka
Ústav přístrojové techniky, 2023

SMV-2023-16: Development of welding joints for vacuum systems
Zobač, Martin; Vlček, Ivan; Dupák, Libor; Rončák, Ján; Zobačová, Jitka
2023 - Czech
The subject of the project was further research and development of permanent joints of metal materials by electron beam welding. The outcome of the project was specific technological procedures for the given assemblies. The project had significant experimental demands. Projekt se zabýval dalším výzkumem a vývojem nerozebíratelných spojů kovových materiálů, a to s využitím technologie svařování elektronovým svazkem. Výsledkem tohoto úsilí byly specifické technologické postupy vhodné pro konkrétní sestavy. Výrazná experimentální náročnost byla charakteristickým rysem tohoto projektu. Keywords: electron beam welding Available at various institutes of the ASCR
SMV-2023-16: Development of welding joints for vacuum systems

The subject of the project was further research and development of permanent joints of metal materials by electron beam welding. The outcome of the project was specific technological procedures for ...

Zobač, Martin; Vlček, Ivan; Dupák, Libor; Rončák, Ján; Zobačová, Jitka
Ústav přístrojové techniky, 2023

SMV-2023-41: Absorptive coatings for quantum computers
Králík, Tomáš
2023 - Czech
This contract research focused on the thermal analysis of absorptive layers created by anodic oxidation on aluminium alloy, which are optimized for use at extremely low temperatures. These specific layers were designed for the low-temperature parts of quantum computers, where they play a key role in eliminating the reflection of thermal radiation from the hotter areas of the computer cryostat to the ultra-low temperature areas. Other key requirements for these absorptive layers are high thermal conductivity, necessary for efficient heat transfer within a quantum computer, good mechanical stability and extremely low outgassing to ensure long-term functional behaviour of the layers in challenging low-temperature conditions. The goal of this research was not only to verify the total hemispheric emissivity of three specific types of coatings in the temperature range from 10 K to 300 K. In this case, emissivity is a suitable indicator of the thermal absorptive behaviour of the layer. A study of the emissivity of these layers in the entire spectrum of temperature conditions relevant for quantum computers was carried out. This extensive analysis was intended to provide an insight into the suitability of these absorptive layers for applications in the field of low-temperature technologies, with an emphasis on the requirements of quantum computers. Uvedený smluvní výzkum se zaměřoval na termální analýzu absorptivních vrstev vytvořených anodickou oxidací na hliníkové slitině, které jsou optimalizované pro využití při extrémně nízkých teplotách. Tyto specifické vrstvy byly koncipovány pro nízkoteplotní části kvantových počítačů, kde hrají klíčovou roli při eliminaci odrazu tepelného záření z teplejších oblastí kryostatu s počítačem do oblastí s ultra nízkou teplotou. Dalšími klíčovými požadavky na tyto absorptivní vrstvy je vysoká tepelná vodivost, nezbytná pro efektivní přenos tepla v rámci kvantového počítače, dobrá mechanická stability a extrémně nízké odplyňování, aby bylo zajištěno dlouhodobé funkční chování vrstev v náročných nízkoteplotních podmínkách. Cílem tohoto výzkumu bylo nejen ověřit totální hemisférickou emisivitu tří specifických typů povlaků v rozsahu teplot od 10 K do 300 K. Emisivita je v tomto případě vhodným ukazatelem tepelně absorptivní chování vrstvy. V tomto kontextu byla provedena systematická studie emisivity těchto vrstev v celém spektru teplotních podmínek relevantních pro kvantové počítače. Tato rozsáhlá analýza měla za cíl poskytnout zjistit vhodnosti těchto absorptivních vrstev pro aplikace v oblasti nízkoteplotních technologií, s důrazem na požadavky kvantových počítačů. Keywords: emissivity; thermal radiation; cryogenics; coating Available at various institutes of the ASCR
SMV-2023-41: Absorptive coatings for quantum computers

This contract research focused on the thermal analysis of absorptive layers created by anodic oxidation on aluminium alloy, which are optimized for use at extremely low temperatures. These specific ...

Králík, Tomáš
Ústav přístrojové techniky, 2023

SMV-2023-40: Characterization of sources and optical elements of coherent optics and use for commercial devices
Holá, Miroslava; Řeřucha, Šimon; Pravdová, Lenka; Čížek, Martin
2023 - Czech
The contract research was focused on the characterization of the laser source. The characterization of the laser source was divided into two parts. The first part was focused on characterizing the optical frequency of the laser source for at least 100 hours with a resolution better than 100kHz. The second part concerned the zero-drift characterization of a common-path differential interferometer. It was a measurement of interference phase fluctuations during the reflection of interferometer arm beams on a common mirror (zero-drift) lasting at least 100 hours with a resolution better than 1 nm for a pair of differential interferometers with simultaneous measurement of atmospheric parameters. Smluvní výzkum byl zaměřen na charakterizace laserového zdroje. Charakterizace laserového zdroje byla rozdělena do dvou částí. První část byla zaměřena na charakterizaci optické frekvence laserového zdroje v délce minimálně 100 hodin s rozlišením lepší než 100kHz. Druhá část se týkala charakterizaci zero-driftu diferenčního interferometru typu common-path. Jednalo se o měření kolísání interferenční fáze při odrazu svazků ramen interferometru o společné zrcadlo (tzv. zero-drift) v délce minimálně 100 hodin s rozlišením lepším než 1nm pro dvojici diferenčních interferometrů se souběžným měřením parametrů atmosféry. Keywords: frequency stability; zero-drift; differential interferometer; flatness of optical elements Available at various institutes of the ASCR
SMV-2023-40: Characterization of sources and optical elements of coherent optics and use for commercial devices

The contract research was focused on the characterization of the laser source. The characterization of the laser source was divided into two parts. The first part was focused on characterizing the ...

Holá, Miroslava; Řeřucha, Šimon; Pravdová, Lenka; Čížek, Martin
Ústav přístrojové techniky, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases